Kingston 16GB 2666MHz DDR4 Non-ECC CL19 DIMM 2Rx8

Brand: Kingston

Product Code: KVR26N19D8/16

Availability:In stock

$110.00 110.00

Kingston 16GB (1x16GB) DDR4 UDIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Desktop PC Memory This document describes ValueRAM's KVR26N19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: • Power Supply: VDD=1.2V Typical • VDDQ = 1.2V Typical • VPP - 2.5V Typical • VDDSPD=2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Dual-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.23” (31.25mm) • RoHS Compliant and Halogen-Free